User Manual

Resetting parameters to default
This section explains how to reset the EQ or Dynamics settings of the currently-selected channel, or GEQ/PEQ
or Plug-in settings, to their default values.
NOTE
Pressing the FLAT button for GEQ/PEQ will reset the GAIN parameter for all bands to 0 dB.
1 Open a popup window that features tool buttons.
2 Select a channel EQ, Dynamics, or Delay, or GEQ/PEQ or Plug-in, for which you
want to reset the parameters.
NOTE
You can select multiple channels to reset those channels’ EQ or Dynamics settings using the corresponding popup windows
(CH1-72, CH73-144, CH145-216, CH217-288*1, MIX, or MTRX/ST).
(
*1 When the DSP-RX-EX is connected
3 Press the DEFAULT button.
A dialog will request that you confirm the initialization operation.
4 To execute the initialization, press the OK button.
The Initialization operation starts. If you decide to cancel the initialization operation, press the
CANCEL button instead of the OK button.
125
Basic operations on the panel > Resetting parameters to default