User Manual

DIGITAL GAIN field
3
2
1
a
Ф (Phase) button
Switches the phase of the head amp input signal between normal phase (gray) and reverse phase (orange).
b
DIGITAL GAIN knob
Indicates the digital gain value. Use the screen encoder to adjust the digital gain. If the Gain Compensation function is
turned on, this knob will adjust the level of the signal input to the selected channel.
c
GANG button
Appears if channels are paired. If this button is on, the differences in digital gain will be maintained, and the digital
gain GANG button will also be turned on.
DELAY field
1
3
2
a
DELAY ON buttons
Switches delay on or off for the selected channel.
b
Delay time
Each number indicates the delay time. Use the corresponding screen encoder to adjust the delay time. In addition,
you can press one of these values to display the DELAY TIME popup window, in which you can set the delay time.
c
GANG button
Appears if channels are paired. If this button is on, then differences in delay time will be maintained.
145
Screen Overview > About the SELECTED CHANNEL VIEW screen