User Manual

e
HIGH SHELVING ON/OFF button
Turn on this button to switch the HIGH band to a shelving type filter.
f
LOW SHELVING ON/OFF button
Turn on this button to switch the LOW band to a shelving type filter.
g
BYP (BYPASS) button
Temporarily bypasses the EQ for each band.
h
EQ parameter setting knobs
Indicate the Q, FREQUENCY, and GAIN parameters for each band. Press one of these knobs to display the
corresponding parameter name and value in the upper part of the channel name area, and you will be able to use the
screen encoder to adjust the value.
LPF field
This field enables you to set the LPF.
2
31
a
LPF knob
Specifies the cutoff frequency of the low pass filter.
b
ON button
Switches the LPF on or off.
c
LPF type select button
Enables you to set the LPF attenuation per octave to −6 dB/oct or −12 dB/oct.
HPF field
This field enables you to set the HPF.
2
31
148
Screen Overview > About the SELECTED CHANNEL VIEW screen