User Manual

e
+48V indicator
Indicates the phantom power (+48V) on or off status for the head amp. This indicator is not displayed unless the head
amp is patched to the channel.
f
indicator (input channels only)
Indicates the phase setting for the head amp input.
g
M/S indicator
Appears when the M/S Decode Indicator function is enabled.
Digital gain parameters
1
3
2
a
DIGITAL GAIN knob
Indicates the digital gain value. Use the screen encoder to adjust the digital gain. If the Gain Compensation function is
turned on, this knob will adjust the level of the signal input to the input channel.
b
OVER indicator
Lights when a signal at the input port or from the rack output is clipping. This indicator is available only if an input
channel is selected.
c
indicator
Indicates the phase setting for each channel.
NOTE
You can display either analog gain or digital gain in the OVERVIEW screen by using the GAIN SHOWN ON OVERVIEW SCREEN
setting on the PREFERENCES screen.
SILK field
This field indicates the Isolate setting status. A bar graph on the right displays the TEXTURE of the SILK
processing.
158
Screen Overview > About the OVERVIEW screen