User Manual

TO STEREO field
This field displays the on/off status and pan/balance setting of the signal sent to the STEREO bus. Press this
knob and you will be able to use the screen encoder and the [TOUCH AND TURN] knob to adjust the value. If
you press the knob once again, the TO STEREO popup window will appear. This field varies depending on the
type of the selected channel.
When an input channel or MIX channel is selected:
a
TO STEREO PAN knob
Sets the pan/balance of a signal routed to the STEREO bus. Press the knob to open the TO STEREO popup window.
1 3 2
b
TO ST A/TO ST B indicators
Indicate the status of a signal sent to the STEREO A bus and STEREO B bus respectively. If an input or MIX channel is
set to LCR mode, the LCR indicator will appear.
2
c
∑ clipping indicator
Lights to indicate that a signal is clipping at some point in the channel.
When MATRIX or STEREO channels are selected:
If STEREO channels are selected, the stereo balance will be displayed. Also, If MATRIX channels are paired,
the balance will be displayed. The ∑ clip indicator will appear if the signal is clipping at some point in the
channel.
DCA field
A DCA (1–24) to which the channel is assigned is displayed on the first and/or second row in this field. Press
this field to open the “DCA/MUTE ASSIGN window (1CH)”(p.577).
162
Screen Overview > About the OVERVIEW screen