User Manual

RPio622
RY16-ML-SILK
RY16-DA
1 Analog input connection Connect a microphone or line-level component to the input jacks of the RY card
(RY16-ML-SILK).
NOTE
In the default status, there are no patch settings for these input jacks. Before you can use signals at these jacks as the input, you need
to make patch settings.
2 Analog output connection Connect a speaker system to the output jacks of the RY card (RY16-DA) to patch
the signals on the output channels (MIX, MATRIX, or STEREO), monitor signals and cue signals.
Digital I/O connections
Before you connect digital audio equipment, you need to install an optional card on the I/O rack and the DSP
engine. You can also use the AES/EBU connector on the control surface.
175
Quick Guide > Connecting the devices