User Manual

Patching the input ports
Follow the steps below to patch an input channel to the input port to which the microphone was connected
as described in the “Connecting the devices” section.
NOTE
The PATCH screen displays the input and output ports assigned to the TWINLANe network.
1 Press the PATCH button on the menu bar in the touch screen.
The PATCH screen will appear.
2 Press the INPUT tab.
3 Use the knob in the upper right to display the desired input port.
NOTE
The [TOUCH AND TURN] knob enables you to control the parameter of the knob you are touching on the touch screen.
For RY card slot 1 on the I/O rack (M1), “M1/RY1” will be displayed.
4 Use the knob in the lower left corner to display the input channel.
183
Quick Guide > Patching the input ports