User Manual

Patching the output ports
Follow the steps below to patch output channels to the output ports to which the speaker system was
connected as described in the “Connecting the devices” section.
NOTE
The PATCH screen displays the input and output ports assigned to the TWINLANe network.
1 Press the PATCH button on the menu bar in the touch screen.
The PATCH screen will appear.
2 Press the OUTPUT tab.
3 Use the knob in the upper right to display the desired output ports.
NOTE
Press the knob you want to control on the touch screen so that you will be able to control it using the [TOUCH AND TURN]
knob.
For RY card slot 2 on the I/O rack (M1), M1/RY2 will be displayed.
4 Use the knob in the lower-left corner to display the output channels.
185
Quick Guide > Patching the output ports