User Manual

4 Use the [▲]/[▼] keys to select the DSP engine to be mirrored.
NOTE
If the Unit ID of the DSP engine does not support mirroring, the Unit IDs that can be set (1A, 1B, etc.) will not be displayed.
5 Press the [ENTER] key.
6 Use the [▲]/[▼] keys to select the desired mirroring mode.
7 Press the [ENTER] key.
8 The DSP engine will restart.
The Mirroring mode is displayed in the indicator of the SYSTEM popup window.
The active DSP engine can be switched with the active/standby switch button or the DSP popup button.
204
Network and Connections > About DSP mirroring