User Manual

About the sampling rate converter (SRC)

SRC is built into all input and output channels (one SRC for every two channels) of the AES/EBU jacks on the

rear panel of the control surface and of the RY16-AE. This allows digital signals that are not synchronized to

the RIVAGE PM series to be input and output.

SRC block diagram

SRC

CLOCK

OUT

INT 44.1k

INT 88.2k

INT 48k

INPUT

INPUT*

INTERNAL

OUTPUT

SRC

DSP ENGINE

INT 96k

AUDIO:

CLOCK:

INPUT

OUTPUT

SRC block diagram

Extracting clock

The input SRC converts the signal to the system clock of the RIVAGE PM series. The output SRC converts the

signal to the specified internal clock source or to the same clock as the input of the same channel.

* Only the corresponding input channels can be selected (if OUT1/2, then IN1/2). For example, IN7/8 cannot

be used for OUT1/2.

212

Network and Connections > About the sampling rate converter (SRC)