User Manual
Bay
About bays
A bay consists of a group of 12 faders located across the Touch Screen section and the Channel Strip section.
The CS-R10 and CSD-R7 have three bays; the CS-R10-S has two bays. You can operate these bays
independently. Therefore, you can perform mixing operations, such as recalling settings to the touch screen
or switching between 12-fader layers on a bay, without affecting the settings on other bays. Please note that
unlike bay L and bay C, bay R does not feature a touch screen or screen encoders beneath it. If you connect
an external screen monitor, you will be able to use it exclusively for bay R. The external monitor will display
content similarly to bay L and bay C, except that it will display a layer or channels that are selected on bay R.
Bay L Bay C
Bay R
Selected Channel section
214
Bay > About bays