User Manual

a
INPUT [1-72]/[73-144] keys
Enable you to select an input layer.
NOTE
Press the INPUT [1-72] key and INPUT [73-144] key simultaneously to select the INPUT 145-288 channel layer. Press these two
keys simultaneously again to select the INPUT 1-144 layer.
b
OUTPUT [MIX]/[MATRIX] keys
Enable you to select an output layer.
c
[DCA] key
Enables you to select a DCA layer.
d
CUSTOM [1]/[2] keys
Enable you to select a custom layer. Generally, you can assign custom faders of two banks (total of 12 layers) to each
custom layer.
If you press the CUSTOM [1] and CUSTOM [2] keys simultaneously, these key indicators will flash, and the INPUT[1-72]
and [73-144] keys, OUTPUT [MIX] and [MATRIX] keys, and [DCA] keys will switch their function from the selection of
the base layers to the selection of the custom layer banks. Press the CUSTOM [1] and CUSTOM [2] keys
simultaneously again to turn off the key indicators. The key function will switch back to the selection of the base
layers.
216
Bay > Faders and fader layers