User Manual

e
Layer display
Indicates the selected layer.
f
Layer Select [A]/[B]/[C]/[D]/[E]/[F] keys
Enable you to select a layer. Different layers are recalled to the faders depending on the combination of the keys, as
shown in the table below: (Please refer to the Note regarding the INPUT [1-72]/[73-144] keys.)
Key
INPUT [1-72] / INPUT
[1-72]+INPUT [73-144]*
INPUT [73-144] / INPUT
[1-72]+INPUT [73-144]*
OUTPUT[MIX]
OUTPUT[MATRIX
]
[DCA]
[A] Input 1-12 / 145-156* Input 73-84 / 217-228 MIX 1–12 MATRIX 1–12 DCA 1–12
[B] Input 13-24 / 157-168* Input 85-96 / 229-240* MIX 13–24 MATRIX 13–24 DCA 13–24
[C] Input 25-36 / 169-180* Input 97-108 / 241-252* MIX 25–36 MATRIX 25–36 –
[D] Input 37-48 / 181-192* Input 109-120 / 253-264* MIX 37–48 STEREO –
[E] Input 49-60 / 193-204* Input 121-132 / 265-276* MIX 49–60 CUE/MONITOR –
[F] Input 61-72 / 205-216* Input 133-144 / 277-288* MIX 61–72 – –
■CS-R5
(
B
^
&
A
*
a
INPUT [1]/[2] keys
Enable you to select an input layer. Press the INPUT [1] key to select the INPUT 1-72 layer. Press the INPUT [2] key to
select the INPUT 73-144 layer.
Press the INPUT [1] key and INPUT [2] key simultaneously to select the INPUT 145-288 layer. Press these two keys
simultaneously again to select the INPUT 1-144 layer. When the INPUT 145-288 layer is selected, these key indicators
light up in a different color than when the INPUT 1-144 layer is selected.
217
Bay > Faders and fader layers