User Manual

b
[MIX]/[MATRIX] keys
Enable you to select an output layer.
c
[DCA] key
Enables you to select a DCA bank.
d
[CUSTOM] key
Turns Custom mode on or off. Use the INPUT [1], [2], [MIX], [MATRIX], and [DCA] keys to select a Custom bank. The
bank numbers (1–5) are labeled adjacent to these keys.
e
Layer displays
Indicates the name of the layer selected via the Layer select keys (see u on page 18).
f
Layer Select [A]/[B]/[C]/[D]/[E]/[F] keys
Enable you to select a layer. Different layers are recalled to the faders depending on the combination of the keys, as
shown in the table below: (Please refer to the Note regarding the INPUT [1]/[2] keys.)
Key
INPUT [1] / INPUT
[1]+[2]*
INPUT [1] / INPUT
[1]+[2]*
[MIX] [MATRIX] [DCA]
[A] Input 1-12 / 145-156* Input 73-84 / 217-228 MIX 1–12 MATRIX 1–12 DCA 1–12
[B] Input 13-24 / 157-168* Input 85-96 / 229-240* MIX 13–24 MATRIX 13–24 DCA 13–24
[C] Input 25-36 / 169-180* Input 97-108 / 241-252* MIX 25–36 MATRIX 25–36 –
[D] Input 37-48 / 181-192* Input 109-120 / 253-264* MIX 37–48 STEREO –
[E] Input 49-60 / 193-204* Input 121-132 / 265-276* MIX 49–60 CUE/MONITOR –
[F] Input 61-72 / 205-216* Input 133-144 / 277-288* MIX 61–72 – –
218
Bay > Faders and fader layers