User Manual

Selected channel concepts
The RIVAGE PM series enables you to select a specific channel to control or for which to display mixing
parameters.
Types of selected channels
The CS-R10 control surface enables you to select specific “independent” channels. This feature enables you
to control multiple channels on a single control surface.
Selecting a channel by using hardware
You can select a specific channel for the Selected Channel section (hardware). You can also use [SEL] keys on
each bay.
Selecting channels on screen (up to three individual channels)
You can also customize links between those on-screen selected channels on bay L, C or R (external display) of
the CS-R10 or CSD-R7, or those on-screen selected channels on bay C or R (external display) of the CS-R10-S,
and the ones selected via hardware keys, in accordance with your operational style.
Hardware [SEL] key
Selected Channel section
Exclusively used for
this section
Hardware [SEL] key
A [SEL] key is used to select the corresponding channel for the Selected Channel section (hardware).
However, the [SEL] keys can also be linked to on-screen selected channels to assign channels to a DCA or
mute group.
Selecting channels on screen
In addition to the Selected Channel section (hardware), the touch screen in each bay is useful for controlling
parameters for one specific channel. One specific channel selected on each touch screen is called an “on-
screen selected channel.”
You can select a channel on screen in one of the following ways:
219
Bay > Selected channel concepts