User Manual

1
a
Press either side (+/– buttons) of the selected channel indication in the upper-left of the
screen.
Press the left side (–) of the selected channel indication to select the preceding channel. Press the right side (+) of the
area to select the next channel.
b
Press the channel name area located at the bottom of the screen.
Press the channel name repeatedly to switch the selected channel on screen. If you switch fader layers in the meter
area, the channel name area will change the indication accordingly. In this way, you can access any channel on
screen.
NOTE
If you use the [FADER BANK]>[SEL] LINK function specified in the PREFERENCES window, you will be able to automatically switch to
the selected channel in each bank (a channel selected most recently) while switching between fader banks (Preferences Settings).
220
Bay > Selected channel concepts