User Manual

SYSTEM SETUP field (SETUP screen)
This field enables you to make various settings that globally apply to the control surface.
1 2 3 4
9
8
) ! @
5
6
7
#
$
%
C
& (* A
B
^
a
SYSTEM CONFIG popup button
Press this button to access the “HY SLOT popup window (Online)”(p.250), in which you can configure the TWINLANe
network and set up the components that comprise the RIVAGE PM series.
b
DEVICE SYNC popup button
Press this button to access the DEVICE SYNC popup window, in which you can set the direction of data
synchronization.
c
WORD CLOCK popup button
Press this button to access the “WORD CLOCK popup window (Master mode)”(p.293), in which you can set the word
clock.
d
DELAY COMPENSATION popup button
Press this button to access the DELAY COMPENSATION popup window, in which you can make settings to
compensate for signal delay.
e
BUS SETUP popup button
Press this button to access the “BUS SETUP page”(p.326), in which you can switch bus operation, mono/stereo, or
send point, and specify mix minus and surround settings.
f
+48V MASTER button
Switches the console’s master +48V master phantom power on or off. If this button is off, phantom power will not be
supplied even if the +48V button of an OMNI jack input channel or TALKBACK IN is on.
230
System Setup > SYSTEM SETUP field (SETUP screen)