User Manual

Selecting and setting up the components
Follow the steps below to set up the components for the RIVAGE PM series system by selecting DSP engines
and making settings for the HY slot and Y slot.
1 Press the SETUP button on the menu bar to access the SETUP screen.
2 Press the SYSTEM CONFIG button.
The SYSTEM popup window appears.
3 Make sure that the proper DSP engines have been selected for connection. (DSP-
R10, CSD-R7, DSP-RX, DSP-RX-EX)
4 Mount the HY card. (HY Slot 1-4; HY Slot1-3 for CSD-R7)
TWINLANe interface cards (HY256-TL, HY256-TL-SMF) can only be mounted in HY Slot 1 or 2.
(Only HY Slot1 for CSD-R7)
5 Mount the MY card, if necessary.
6 Press the × button to close the SYSTEM popup window.
NOTE
To access the SYSTEM popup window, press the [SYSTEM] key on the panel.
242
System Setup > Selecting and setting up the components