User Manual

c
DSP popup button
Press this button to access the SYSTEM CONFIG [DSP] popup window, in which you can assign the DSP engine’s MIX
channels, MATRIX channels, and direct outputs to the TWINLANe network, and make settings for the HY slots and MY
slots. In the case of a DSP engine that is the word clock master for any TWINLANe network (Main, Sub, or Console), an
indicator is shown above this button.
In the case of a DSP mirroring configuration, this area will display a button for switching the DSP engine between
active and standby, and DSP popup buttons for two units. In this case, the SYSTEM CONFIG [DSP] popup window that
is opened by the DSP popup button will be valid only for the DSP engine that is selected as the active unit by the
active/standby button.
d
TWINLANe channel indication
Indicates the total number of channels currently used by the TWINLANe network. A maximum of 400 channels can be
assigned on the TWINLANe network. You cannot assign more than 400 channels.
247
System Setup > HY slot popup window