User Manual

SYSTEM CONFIG [CS1] popup window
3
2
1
4
This screen contains the following items.
a
Parameter settings popup buttons
Press a button to open a popup window, in which you can set the parameters of each card.
b
MY SLOT (1–2) popup buttons
Press a button to open the MY CARD SELECT popup window, in which you can select a Mini-YGDAI card.
c
HIGH Fs FORMAT select button
When a Mini-YGDAI card is using high sampling (88.2 kHz, 96 kHz), these buttons select the operating mode as
DOUBLE SPEED, DOUBLE CHANNEL, or SINGLE for IN and OUT respectively.
NOTE
This setting will be ignored if you try to specify a mode that the MY card does not support. The I/Os for the control surface are
assigned as part of the DSP engine on the RIVAGE PM series. Therefore, you do not need to assign channels to the TWINLANe
network.
d
Control surface select popup button
This shows the control surfaces that are connected to the system. Press this button to display a popup window, in
which you can select a control surface.
259
System Setup > SYSTEM CONFIG [CS1] popup window