User Manual

Editing the internal parameters for OUTPUT 1-8/OUTPUT
9-16 of the RY16-AE, and AES/EBU OUTPUT 1-8 on the
rear panel of the control surface
9
1
2
4
5 6
7
8
3
This screen contains the following items.
a
Patch indication
Indicates the channel that is patched.
b
DELAY button
Switches the output delay on or off.
c
Delay time knob
Sets the delay time of the output port. If you press this knob when it is selected, the DELAY TIME popup window will
appear. The delay time value is shown above the knob in millisecond units, and below the knob in the units that are
selected in the DELAY SCALE popup window.
NOTE
If the scale is set to ms, the delay time value above the knob will not be shown.
d
PHASE button
Switches the phase of the output signal.
e
SRC button
Switches the sampling rate converter on/off for each pair of channels.
267
System Setup > Editing the internal parameters for OUTPUT 1-8/OUTPUT 9-16 of the RY16-AE, and AES/EBU
OUTPUT 1-8 on the rear panel of the control surface