User Manual

f
Sampling rate select menu
Selects the output sampling rate when an SRC is turned on. Choose from SAME AS INPUT (same as the word clock
that is input), 44.1 kHz, 48 kHz, 88.2 kHz, or 96 kHz.
g
GAIN knob
Adjusts the output gain of the output port. Use the screen encoder to adjust the value. Adjust the setting in 1.0 dB
units by turning the knob, or adjust the setting in 0.1 dB units by turning the knob while pressing it. The current value
is shown immediately below the knob.
h
Level meter
Indicates the output level of the signal after level adjustment.
i
Tabs
Switch the display in units of eight channels.
268
System Setup > Editing the internal parameters for OUTPUT 1-8/OUTPUT 9-16 of the RY16-AE, and AES/EBU
OUTPUT 1-8 on the rear panel of the control surface