User Manual

h
HPF button
Toggles the high pass filter on or off for each port.
NOTE
This is a parameter within the I/O rack. It is different than the HPF within the channel module of the control surface.
i
FREQUENCY knob
Sets the HPF cutoff frequency.
j
M/S button
Switches the M/S decoder on or off for each pair of channels.
k
S-GAIN knob
Adjusts the side gain of M/S.
NOTE
The OMNI IN of the CS-R5 or CS-R3 does not support the SILK function.（e、f、g）
273
System Setup > Editing the internal parameters for OMNI IN of the control surface