User Manual

a
REDUNDANCY MODE
Select one of the following two redundant pairs:
・ MODE 1
A combination of an optical connection and coaxial connection is used to maintain redundancy.
・ MODE 2
Two optical connections or two coaxial connections are used to maintain redundancy.
b
INPUT PRIORITY
Specifies which input signal from two redundant lines will take priority.
• PRI1
With MODE 1, OPTICAL 1 and OPTICAL 2 signals will take priority.
With MODE 2, OPTICAL 1 and COAXIAL 1 signals will have priority.
• PRI2
With MODE 1, COAXIAL 1 and COAXIAL 2 signals will take priority.
With MODE 2, OPTICAL 2 and COAXIAL2 signals will take priority.
c
SPLIT button
Specifies whether the input signals will be split and routed to the output jacks. The destination is the output jacks of
the same type.
• ON
Input signals will be split and routed to the output jacks.
• OFF
Input signals from the mounted card will be output without being split.
275
System Setup > Settings for the HY128-MD card