User Manual

Specifying the type and number of cards (Offline)
The following example explains how to add an RY card for use in the I/O rack. Use the same procedure for
adding a different card to a different component.
1 Press the SETUP button on the menu bar to access the SETUP screen.
2 Press the SYSTEM CONFIG button to access the SYSTEM CONFIG popup window.
3 Press the tab for the HY SLOT1 or HY SLOT2 into which the TWINLANe network card
(HY256-TL/HY256TL-SMF) has been inserted. (The CSD-R7 features only HY-SLOT1.)
The HY slot popup window will appear.
4 Press the the popup button for the mounted I/O rack.
The “I/O rack settings popup window”(p.283) will appear.
5 Press the RY SLOT popup button.
The “RY CARD SELECT popup window”(p.286) appears.
6 Select the RY card that you want to use, and press the OK button.
You will return to the I/O rack settings popup window. To cancel, press the CANCEL button. If
you want to add another RY card, repeat steps 4–5.
7 When you finish adding cards, press the × button to close the I/O rack settings
window.
282
System Setup > Specifying the type and number of cards (Offline)