User Manual

I/O rack settings popup window
)
1
2
!
@
3
7
8
9
6
4
7
5
#
This screen contains the following items.
a
I/O rack select popup buttons
These buttons represent the I/O racks that are connected to the system. Press one of these buttons to access a popup
window, in which you can select an I/O rack. The row at the top of the button shows the power supply status of
POWER A and B (green: power on, red: power off). The device icon indicates the status of +48V MASTER (red: on; grey:
off), and also the status of the device (green: normal; yellow: abnormal; red: critical error).
b
Optical reception power status display
This section indicates the power status and readings of the optical receiver for communication on the TWINLANe
network.
Green: Normal
Yellow: Low optical reception power
Red “LOW”: No reception
It also indicates the type of HY cards (MMF:HY256-TL; SMF:HY256-TL-SMF) and the total length of the cables.
c
RY SLOT (1–6) popup buttons
When you press a button, the RY CARD SELECT popup window appears, in which you can select an RY card.
d
MY SLOT (1–2) popup buttons
Press a button to open the MY CARD SELECT popup window, in which you can select a Mini-YGDAI card.
e
HY SLOT (2) popup button
Press the button to open the HY CARD SELECT popup window, in which you can select an HY card.
283
System Setup > I/O rack settings popup window