User Manual

AUTO (DHCP)... The. IP address is obtained automatically.

STATIC IP ......... The IP address is specified manually.

DANTE SETUP popup button

Press this button to access the DANTE SETUP popup window, in which you can make settings for Dante-enabled HY

cards.

REFRESH button

Press this button to update the I/O rack information in the Dante audio network to its latest state.

DEVICE RACK USAGE indication

This shows the state of IO rack resource usage.

I/O rack select button

This indicates the I/O rack’s ID number, model name, and the number of inputs/outputs. When you press this, the

DEVICE SELECT screen or DANTE I/O DEVICE screen appears, allowing you to mount an I/O rack.

DANTE INPUT PATCH button

When you press this, the DANTE PATCH popup window’s INPUT tab appears, allowing you to select the channels that

will be input from the I/O rack to the Dante-enabled HY card.

DANTE OUTPUT PATCH button

When you press this button, the DANTE PATCH popup window’s OUTPUT tab appears, allowing you to select the

channels that will be output from the Dante-enabled HY card to the I/O rack.

CLEAR ALL button

When you press this button, the mounted state of all displayed I/O racks is cleared.

301

System Setup > HY SLOT window