User Manual

DANTE SETUP popup window

1 2 3

)

7 8

This screen contains the following items.

STATUS indicator

(

DANTE DEVICE LOCKED

The indicator is lit red if the Dante Device Lock function is enabled, preventing the audio network settings of the

Dante device from being changed.

(

AES67 MODE

The indicator is lit green if AES67 (audio network compatibility connection standard) mode is enabled.

DANTE CONTROL ID button

These buttons specify the ID used to distinguish compatible HY cards on the Dante audio network. If the ID is turned

OFF, the DANTE PATCH BY select button is fixed at DANTE CONTROLLER, and Dante patching cannot be edited.

Additionally, the remote functionality of the mounted I/O racks is disabled. If you specify ID #1, the shared settings

(BIT/LATENCY/WORD CLOCK) are also applied to the mounted I/O racks.

NOTE

Assign different IDs to the control surfaces and digital mixing consoles on the Dante audio network.

SECONDARY PORT select buttons

These buttons select how the Dante-enabled HY cards are connected: either the daisy chain connection used for

simple systems with a small number of connected units, or the redundant connection used when connecting

multiple units.

CANCEL button

This button cancels the temporarily edited content during the process of editing DANTE CONTROLLER I/O for SLOT or

SECONDARY PORT.

302

System Setup > DANTE SETUP popup window