User Manual

e
APPLY button
If you have edited the DANTE CONTROLLER ID for SLOT setting or the SECONDARY PORT setting, the settings are
applied when you press this button. A dialog box will ask you to confirm the change.
f
DANTE PATCH BY select buttons
If the THIS CONSOLE button is selected, Dante patching can be modified from the RIVAGE PM series. If the DANTE
CONTROLLER button is selected, Dante patching cannot be controlled.
g
BIT select buttons
These buttons select either 24 bits or 32 bits as the bit depth of the Dante audio network.
h
LATENCY select buttons
These buttons select either 0.25 ms, 0.5 ms, 1.0 ms, 2.0 ms, or 5.0 ms as the latency of the Dante audio network.
i
PREFERRED MASTER button
Turning this ON raises the unit’s order of priority for being the master within the Dante audio network.
j
SYSTEM/SYNC indicators
These indicators show the state of Dante operation. When you press an indicator, a message is shown. For patterns
that indicate a message, an error icon and information icon are shown beside the indicators. For details on what the
indicators show, refer to “Messages” which follows.
For DDM SETTING
STATE
Indicates the status of joining the domain.
(
Domain: Has joined the domain.
(
Disconnected: Has joined the domain, but is not connected to the DDM server.
(
Unmanaged: Has not joined the domain.
LOCAL
Displays the access status for the Dante settings (including the DANTE PATCH) that are currently being
operated for this unit.
(
Read Write: Can be modified.
(
Read Only: Cannot be modified.
REMOTE
Shows the access status for the Dante settings of an external Dante device.
(
Operator: Can read/write
(
Guest: Read only, cannot modify
(
None: Cannot read
Latency display
Displays the currently-selected latency. “----” is shown when offline.
303
System Setup > DANTE SETUP popup window