User Manual

DEVICE LIST
Here’s how to select a device from a list of I/O racks on the Dante audio network, and mount that device.
1
2
3
a
DEVICE LIST
This shows a list of the I/O racks on the Dante audio network. From the list, select the I/O rack that you want to
mount.
NOTE
After the MODEL information appears in blue text, press the OK button to mount the device. If you press the OK button before
this indication appears, the device is not recognized as a supported device. If an identical I/O rack of the identical UNIT ID is
already mounted, the OK button is disabled, and the unit cannot be mounted.
b
DEVICE LIST select knob
Use the [TOUCH AND TURN] knob to operate this, to select the I/O rack that you want to mount.
c
DEVICE IDENTIFY button
This button is available in the case of an I/O rack that is equipped with a DEVICE IDENTIFY function; you can press the
button to identify that device.
312
System Setup > DEVICE LIST