User Manual

DANTE I/O DEVICE [I/O] screen
1
2
5
4
6
3
This screen contains the following items.
a
I/O rack button
This indicates the I/O rack’s ID number and model name. Press this button to display the RACK MOUNT popup
window, in which you can select an I/O rack to mount.
b
Display select buttons
Press a button to display the corresponding I/O rack.
c
I/O rack indication
When you press the HA display area, the I/O DEVICE popup window appears; when you press the output connector
area, the OUTPUT tab of the DANTE PATCH popup window appears.
d
Control status icon
This indicates the control status of the device.
Searching for the device to be controlled
The device to be controlled was discovered, but connection was declined
Attempting to connect to the device
Synchronizing with the device
The device can be controlled
e
SYSTEM/SYNC indicators
These indicate messages such as errors, warnings, and information. For details on the messages, refer to ““Dante
messages”(p.305).”
322
System Setup > DANTE I/O DEVICE [I/O] screen