User Manual

BUS SETUP (Basic settings for MIX buses and MATRIX
buses)
This section explains how to edit the basic settings for MIX buses and MATRIX buses, such as switching
between stereo and monaural, or changing the bus type. The settings you make in the following procedure
are saved as part of the scene.
1 Press the SETUP button to access the SETUP screen.
2 Press the BUS SETUP button to open the BUS SETUP popup window.
This window includes several pages, which you can switch between using the tabs located at
the top of the window.
3 Press the BUS SETUP tab.
The “BUS SETUP page”(p.326) opens.
4 Use the tabs to display the buses for which you want to edit the settings.
5 Use the SIGNAL TYPE switch buttons to specify whether each bus will function as
STEREO (main parameters will be linked for two adjacent odd-numbered/even-
numbered buses) or MONOx2 (use as two monaural channels).
324
System Setup > BUS SETUP (Basic settings for MIX buses and MATRIX buses)