User Manual

BUS SETUP page
4
1 2 3 1 2 3
This screen contains the following items.
a
SIGNAL TYPE switch buttons
Enable you to select how signals are processed for every adjacent pair of buses. You can select either STEREO (stereo
signal) or MONOx2 (monaural signal x 2).
b
BUS TYPE select buttons
Enable you to select the bus type for every adjacent pair of buses. You can select VARI (adjustable send level), FIXED
(fixed send level), or “Mix minus”(p.330).
c
PAN LINK button
This button will be displayed only if SIGNAL TYPE is STEREO and the bus type is set to VARI. If the button is on, the
signals routed to the corresponding channels will link with the TO STEREO pan setting.
d
Tabs
Switch between MIX1-24, MIX25-48, MIX49-72 and MATRIX bus.
326
System Setup > BUS SETUP page