User Manual

SEND indications for a mix minus bus
OVERVIEW screen
SEND field
After specifying the mix minus bus
By pressing the [SHIFT] key you can specify the OWNER channel. After the setting is made, it is shown in red. This will be the
SEND ON/OFF button.
After the setting is made, it is shown in red.
For channels other than the OWNER channel, you will be able to specify the OWNER channel by pressing the [SHIFT] key.
SELECTED CHANNEL VIEW screen
MIX/MATRIX SENDS field
Send to a mix minus bus is blue
However, send from the OWNER channel is red
334
System Setup > SEND indications for a mix minus bus