User Manual

SURROUND SETUP (specifying surround mode)
If you specify surround mode in BUS SETUP, you’ll be able to use 5.1 surround panning and monitoring. By
using two surround buses, IS surround production also becomes easy. This allows a highly flexible
monitoring environment that includes downmixing and external monitor sources. MIX buses 1–12 and
MATRIX buses 1–4 are used for the two surround buses and the downmix bus.
1 Press the SETUP button to access the SETUP screen.
2 Press the BUS SETUP button to open the BUS SETUP popup window.
This window includes several pages, which you can switch between using the tabs located at
the top of the window.
3 Press the SURROUND SETUP tab.
The “SURROUND SETUP screen”(p.337) appears.
4 Press the SURROUND mode switching button.
5 Using the surround output assign buttons, select the surround output channel to
which each MIX channel is assigned.
335
System Setup > SURROUND SETUP (specifying surround mode)