User Manual

PRE POST
PRE FILTER POST FADER
PRE EQ POST ON
PRE DYN1
PRE DYN2
PRE FADER
Library
The “OUTPUT CHANNEL LIBRARY” lets you store and recall various input channel parameters.
MONO
STEREO B can be set to MONO. If it is set to MONO, the same signal is sent to L and R of STEREO B. This is also
used as the CENTER channel of LCR. If it is set to MONO, the same signal is sent to L and R of STEREO B.
LCR
By using STEREO A as L/R and STEREO B (set to MONO) as CENTER, the two stereo buses can be used as an
LCR bus.
370
Patching > Output channel mixing engine section