User Manual

d
OUTPUT COMPONENT/SLOT/CH (input components/slots/channels)
This section indicates the type of the output component, slot number, and channel number for the output port.
The abbreviations displayed in this section have the following meaning.
(
M1–M8, S1–S8 ......... I/O rack 1–8
(
CS1, CS2.........Control surface
(
DSP.......... DSP engine
(
PLUG-IN.........Effect plug-in already mounted in PLUG-IN [SEND]
NOTICE
(
The number below is the number of channels that are patched. If the background is red, no sound is output even if the
channel is patched (such as when the HY144-D is used and ROUTING MODE is set to MODE1).
e
Continuous Patch
button
Press the continuous patch
button, and then rotate the select knob to in the upper right to patch the
intersecting channels continuously. If you press the continuous patch
button, the button and the
button will appear. Press the button again to confirm the selected continuous patches. Press the button to
revert the continuous patches to their previous state.
f
CLEAR ALL button
Press this button to clear all patches.
374
Patching > OUTPUT patch window