User Manual

Port to port
This function freely routes the input and output of each component from an input port to an output port via
the TWINLANe network without passing it through a mixing channel.
Port to port can be used with the following inputs and outputs.
(
RPio622/222 (RY/MY/HY card slots)
(
DSP-R10 (MY/HY card slots)
(
Console 1/2 (OMNI IN connectors, OMNI OUT connectors, AES/EBU connectors, MY card slots)
Port to port within the same HY slot (HY1 or HY2 (only on the RIVAGE PM10 system)) can be patched directly.
M1-M8 Ports
M1-M8 Ports
Between slots, patching can be done via SLOT BRIDGE patch (36 outputs and 36 inputs for each slot).
HY1
HY1
PORTS
HY2
PORTS
HY3
PORTS
HY4
PORTS
Local
PORTS
M1-M8 RPio
Output Ports
Slot Bridge Output
(HY1)1-36
M1-M8 RPio
Intput Ports
HY2
HY1
PORTS
HY2
PORTS
HY3
PORTS
HY4
PORTS
Local
PORTS
Slot Bridge Input
(HY2)1-36
Slot Bridge Output
(HY2)1-36
S1-S8 RPio
Intput Ports
Slot Bridge Input
(HY1)1-36
S1-S8 RPio
Output Ports
As an example here, we explain the procedure for patching from an RPio of a RIVAGE PM10 system’s main
network to an RPio of a sub network. In this case, multiple patches are required.
Patch 1 (patch target HY1):
378
Patching > Port to port