User Manual

Using the Monitor function
Controlling the Monitor function via the MONITOR screen
In this screen, you can select desired monitor sources to monitor them from the PHONES A/B output jacks or
external monitor speakers.
1 Connect your monitor system to the OMNI OUT jacks or AES/EBU jack on the rear
panel.
Monitor signals can be sent to any desired output jack or output channel. If you are monitoring
through headphones, make sure that your headphones are connected to the front panel
PHONES A/B output jacks.
2 Press the MONITOR button on the menu bar.
The “MONITOR screen”(p.391) appears. The MONITOR field on the MONITOR screen enables
you to check the current monitoring settings, and turn monitoring on or off.
3 Press the MONITOR popup button or the meter field.
The “MONITOR SETTINGS popup window”(p.393) appears. In the MONITOR SETTINGS popup
window you can make detailed monitoring settings.
4 Press the tab.
The “MONITOR SOURCE popup window”(p.396) appears. This window enables you to view the
list of monitor sources that have been assigned to DEFINE 1‒ 8.
5 Press the desired MONITOR SOURCE DEFINE button to open the MONITOR SOURCE
SELECT popup window, then select the monitor sources.
“MONITOR SOURCE SELECT popup window (INPUT)”(p.397)
“MONITOR SOURCE SELECT popup window (OUTPUT)”(p.398)
“MONITOR SOURCE SELECT popup window (DIRECT INPUT)”(p.399)
You can assign up to 8 channel signals to each DEFINE. Pressing the CLEAR ALL button will
clear all selections. You can choose from the following monitor sources.
6 Use the SOURCE SELECT DEFINE buttons to select “Monitor sources”(p.390).
7 To specify a port as the output destination for monitor signals L, R, and C, press
one of the OUTPUT PATCH buttons (L/R/C) on the MONITOR SETTINGS popup
window to open the OUTPUT PATCH popup window. In this window, choose from
the following monitor signal output destinations (multiple selections are allowed).
When you have selected an output port, press the CLOSE button to close the popup window.
In the same way, specify the output ports for MONITOR OUT L, R, and C.
388
Monitor > Using the Monitor function