User Manual

NOTE
If desired, you can specify output ports only for MONITOR OUT L and R to monitor through two speakers.
8 To enable monitoring, press the MONITOR OUTPUT button to turn it on.
The monitor source you selected in step 5 will be sent to the output destination you specified
in step 7.
NOTE
The PHONES A/B output jacks will always output the monitor signal, regardless of whether the MONITOR OUTPUT button is
on or off.
9 To adjust the monitor level, use the corresponding MONITOR LEVEL knob located in
the UTILITY section of the top panel.
If PHONES LEVEL LINK is ON, use the MONITOR LEVEL knob and the monitor fader, as well as
the PHONES LEVEL knob to adjust the monitor level when monitoring through headphones.
10 Make settings for Dimmer, Delay, Monaural, and Cue Interruption as desired.
NOTE
Monitor on/off operations, selection of the monitor source, and dimmer on/off operations can also be assigned to USER
DEFINED keys (“Assigning a function to a USER DEFINED knob”(p.892)).
389
Monitor > Using the Monitor function