User Manual

MONITOR screen
1
4
6
7
5
8
4
3 3
6
7
52
8
This screen contains the following items.
a
MONITOR popup button
Enables you to access the MONITOR SETTINGS popup window, in which you can make detailed monitoring settings.
Select MONITOR A or B as the control target, and set the parameters in the corresponding field.
b
DIMMER field
Enables you to make settings for the Dimmer function, which temporarily attenuates monitor signals.
(
DIMMER LEVEL knob
Adjusts the amount by which the monitor signals will be attenuated when the dimmer is on.
(
DIMMER ON button
Turn on this button to enable the dimmer function and attenuate the monitor signal.
c
Console select buttons
When using Dual Console, these buttons select whether the MONITOR knob of Console 1 or 2 is used.
d
PHONES LEVEL LINK button
If this button is on, the MONITOR FADER LEVEL knob will adjust the level of signals sent to the PHONES A or PHONES
B output jack.
e
MONITOR SOURCE SELECT buttons
Enable you to select one of the DEFINE 1‒ 8 sources that will be output to the MONITOR bus.
f
MONITOR FADER LEVEL knob
Adjusts the monitor fader level.
391
Monitor > MONITOR screen