User Manual

MONITOR SETTINGS popup window
1
(
2
$
4
7
6
8
9
7
6
8
9
%
&
*
^
5
4
5
3
1
2
3
)
#
!
!
@
@
)
This screen contains the following items.
a
SOURCE SELECT DEFINE buttons
Enable you to select one of the DEFINE 1‒ 8 sources that will be output to the MONITOR bus.
b
MONITOR DELAY knob
Indicates the currently-specified delay time. The millisecond value is indicated above the knob, and the delay time
value in currently-selected units and the currently-selected scale type are indicated below the knob. However if the
scale is set to ms, the delay time value is not shown above the knob.
c
MONITOR DELAY ON button
If this button is on, the monitor signal will be delayed according to the setting of the MONITOR DELAY knob.
d
CUE INTERRUPT button
Press this button to interrupt the monitor signal by the cue signal. If this button is on and the cue is enabled, the cue
signal will be sent to the monitor output.
e
Meters
This field indicates the output level of the monitor L/R/C channels.
393
Monitor > MONITOR SETTINGS popup window