User Manual

f
MONITOR OUT MODE
This section enables you to select one of the following monitor output modes:
(
LR + C DOWNMIX
In this mode, the L/C/R channel signals will be downmixed and output in stereo.
(
MONO
In this mode, monitor signals will be output in monaural.
(
LCR
In this mode, the L/C/R channel signals will be output.
g
CENTER CH ON button
If you plan not to monitor the center channel, turn this button off. If this button is off, the center channel will not be
included in the downmix signal.
h
INSERT button
Press this button to display the window, in which you can insert plug-ins into the monitor signal.
i
INSERT ON button
Switches the plug-in insert on or off. The currently-specified plug-ins are displayed to the left of the button.
j
EQ field
(
EQ graph
This field graphically indicates the approximate response of the EQ. Press this field to open the window, in which
you can set the EQ parameters.
(
EQ ON button
Switches the EQ on or off.
k
OUTPUT PATCH popup buttons
Indicate the monitor output destination slot or port for the L, C and R channels respectively. Press these buttons to
access the OUTPUT PATCH popup window.
l
MONITOR OUTPUT button
Switches Monitor Out on or off.
m
MONITOR FADER LEVEL knob
Adjusts the monitor fader level.
n
DIMMER ON CUE knob
Adjusts the amount by which the monitor signal will be attenuated when cue is on.
DIMMER ON CUE indicators
When cue is active, CUE A and/or CUE B will light.
o
DIMMER LEVEL knob
Adjusts the amount by which the monitor signal will be attenuated when dimmer is on.
p
DIMMER ON button
Turn on this button to enable the dimmer function and attenuate the monitor signal.
394
Monitor > MONITOR SETTINGS popup window