User Manual

MONITOR SOURCE SELECT popup window (INPUT)
432 51
This screen contains the following items.
a
Monitor source selection buttons
Enable you to select monitor sources that will be assigned to the DEFINE buttons. The selected monitor sources will
be highlighted. Press the same button again to cancel the selection.
NOTE
You can select up to eight monitor sources. If you select eight monitor sources, no further selections will be possible. First,
turn off the buttons for unneeded sources.
b
Display switching tabs
Use these tabs to select the type of channels, buses, output jacks, etc. that you want to view on the screen.
c
SET BY SEL button
If this button is on, you will be able to add a channel by using the corresponding [SEL] key.
d
CLEAR ALL button
Press this button to clear all selections.
e
CLOSE button
Press this button to close the popup window and return to the previous screen.
397
Monitor > MONITOR SOURCE SELECT popup window (INPUT)