User Manual

Using the Solo function
This function enables you to monitor the signals routed from one or more specified channels to the main mix
outputs.
1 On the MONITOR screen, press the CUE popup button or the INPUT/DCA/OUTPUT
CUE field to open the CUE popup window.
2 Use the CUE MODE buttons to select either the mode in which channels are mixed
for monitoring, or the mode in which only the last-selected channel is monitored.
Select the MIX CUE button or LAST CUE button.
3 Press the SOLO ON button to turn Solo on.
The confirmation window for solo operation appears.
4 To execute the solo operation, press the OK button.
The button will light up and Solo mode will be enabled.
5 If you want to exclude certain channels or groups from Solo operations as
necessary, press the SOLO SAFE popup button.
The “SOLO SAFE popup window”(p.424) appears.
422
Monitor > Using the Solo function