User Manual

6 Select input channels that will be excluded from Solo operations. (You can specify
more than one.)
The channels specified here will not be muted in Solo mode. The Solo Safe function is useful if
you do not want to accidentally mute certain channels during Solo operations, such as the
main Stereo channels, or Mix channels that send out mix signals to an external recorder.
7 Press the [CUE] key of a desired channel or DCA to turn it on.
Only the corresponding channel or DCA will be output to the buses and output jacks; other
channels and DCAs will be muted. The same signal will also be output from the CUE OUT jacks
and the MONITOR OUT jacks.
NOTE
If you turn on the [CUE] key of an output channel, the signal will be sent only to the corresponding bus.
8 To defeat Solo, press the currently-on SOLO ON/OFF button once again.
NOTE
If you select the LAST CUE button to switch from LAST CUE mode to MIX CUE mode (or vice versa), all previously-enabled
Cue (Solo) signals will be defeated.
423
Monitor > Using the Solo function