User Manual

OSCILLATOR popup window
1 5 6 82
4
7
3
This screen contains the following items.
a
OSCILLATOR MODE buttons
Select one of the following four oscillator operating modes:
SINE WAVE A sine wave is output continuously.
SINE WAVE 2CH Two sine waves (with different frequencies) are output separately.
PINK NOISE Pink noise is output.
BURST NOISE Pink noise is output intermittently.
b
Parameter field
Enables you to set the oscillator parameters. The controllers and their functions in this field vary depending on the
operating mode a.
SINE WAVE:
(
LEVEL knob
Indicates the output level of the sine wave. Use the screen encoder to adjust the value.
(
FREQUENCY knob
Indicates the frequency of the sine wave. Use the screen encoder to adjust the value.
430
Monitor > OSCILLATOR popup window