User Manual

(
FREQUENCY buttons
Enables you to select the sine-wave frequency from 100 Hz, 1 kHz, and 10 kHz.
SINE WAVE 2CH:
(
LEVEL knob (ODD)
Indicates the output level of the odd-channel sine wave. Use the screen encoder to adjust the value.
(
FREQ knob (ODD)
Indicates the frequency of the odd-channel sine wave. Use the screen encoder to adjust the value.
(
LEVEL knob (EVEN)
Indicates the output level of the even-channel sine wave. Use the screen encoder to adjust the value.
(
FREQ knob (EVEN)
Indicates the frequency of the even-channel sine wave. Use the screen encoder to adjust the value.
(
FREQUENCY buttons
Enables you to select the sine-wave frequency from 100 Hz, 1 kHz, and 10 kHz.
The default frequency is 1 kHz for the odd channel and 400 Hz for the even channel. Two meters (odd and
even) will be displayed.
PINK NOISE:
(
LEVEL knob
Indicates the output level of the pink noise. Use the screen encoder to adjust the value.
(
HPF knob
Indicates the cutoff frequency of the HPF that processes the pink noise. Use the screen encoder to adjust
the value. Use the button below the knob to switch the HPF on or off.
(
LPF knob
Indicates the cutoff frequency of the LPF that processes the pink noise. Use the screen encoder to adjust
the value. Use the button below the knob to switch the LPF on or off.
For BURST NOISE:
431
Monitor > OSCILLATOR popup window