User Manual

c
INPUT TO TALKBACK field
(
INPUT TO TALKBACK patch button
Press the button to open the INPUT PORT SELECT popup window, in which you can patch a desired input port/slot
to talkback. The selected port/slot name will appear on the button. If no patch is assigned, button will indicate
“----”.
(
INPUT TO TALKBACK +48 indicator
Indicates the +48V on/off status for the corresponding input port/slot.
(
INPUT TO TALKBACK Ø indicator
Indicates the normal-phase/reverse-phase status for the corresponding input port/slot.
(
ANALOG GAIN knob
Indicates the analog gain setting for the corresponding input port/slot. Use the screen encoder to adjust the value.
(
INPUT TO TALKBACK level meter
Indicates the level of signals after the input gain at the corresponding input port/slot.
d
TALK GROUPS DEFINE buttons
Enable you to select one of the DEFINE monitor sources assigned via the “TALK GROUPS popup window”(p.442).
e
TALKBACK ON button
Switches talkback out on or off. This button is effective for the talkback signals selected in the TALKBACK IN field and
the INPUT TO TALKBACK field.
438
Monitor > MONITOR screen (talkback)