User Manual

TALKBACK ASSIGN popup window
41 2 3
This screen contains the following items.
a
Bus selection buttons
Select the bus as the signal destination from the following options:
(
MX(MIX) 1–72..Output signals of MIX bus 1–72 output signal
(
MT(MATRIX)1–36..Output signals of MATRIX bus 1–36
(
ST A L–ST B R..Output signals of STEREO A L–STEREO B R
b
SET BY SEL button
If this button is on, you’ll be able to add a bus by using the corresponding [SEL] key.
c
CLEAR ALL button
Press this button to clear all selections.
d
CLOSE button
Press this button to close the popup window and return to the previous screen.
443
Monitor > TALKBACK ASSIGN popup window